Home  |  Site Map Print this page       USA  |  Canada(EN)  |  Canada(FR)  |  UK   
   Full Line Catalog
Company | Literature | Tech Info | What's New | Nexus | FAQs | Warehouses | Contact Us | Links
   Product Categories
Product Search: (Not for part number lookup.)

Acrobat© Reader© is required to view all PDF downloads.

Full Line Catalog  /  Fluorescent Emergency Ballasts  /  FPDL/U Series
Catalog Sheet
Specification Sheet
Instruction Sheet
FPDL/U Series

Convert new or existing fluorescent fixtures intemergency lighting units 1350 lumen emergency ballast

  • Steel housing contains, battery, battery charger, transfer circuit and high frequency inverter
  • Optional end caps available
  • Operating temperature 68°F to 122°F (20°C to 50°C)
  • Internal or external mounting to a fluorescent fixture
  • One 14-54W or two 14-39W
  • (2’-4’) T5 and T8 lamps with instant start or rapid start or one 4-pin
  • 18-50W long compact fluorescent or one 4-pin
  • 32W compact fluorescent or one 24-32W U-Bend lamp
  • (1) Lamp 880-1350 Lumens
  • (2) Lamps 850-1300 Lumens
  • Can be wired to operate switched, un-switched or normally off fixtures without affecting normal operation
  • Will cold start and illuminate lamps
  • Fully Automatic solid state charger
  • High capacity, automatic, dust-tight instantaneous transfer relay
  • Low voltage disconnect prevents over discharge of battery
  • Automatic brownout protection
  • Battery connector prevents battery discharge during installation
  • Red charger monitor LED indicates charging of the battery and AC present
  • Momentary test switch allows for quick operational check of entire system
  • Nickel-Cadmium battery
  • Provides 90 minutes of emergency operation
  • Dual voltage 120/277VAC, 60Hz, 3.7W
  • UL924 Listed
  • Damp location listed
  • 3-year limited warranty
Product Categories:
  • no information to display
T&B AccessQuick ShipThomas & Betts
© Thomas & Betts Corporation 2018. No material from this site may be copied, distributed or used in any way without the express prior permission of Thomas & Betts.