Home  |  Site Map Print this page       USA  |  Canada(EN)  |  Canada(FR)  |  UK   
   Full Line Catalog
Company | Literature | Tech Info | What's New | Nexus | FAQs | Warehouses | Contact Us | Links
   Product Categories
Product Search: (Not for part number lookup.)


Acrobat© Reader© is required to view all PDF downloads.


   
Full Line Catalog  /  Fluorescent Emergency Ballasts  /  FPDL1300 Series
[DISCONTINUED]   FPDL1300 Series

Convert new or existing fluorescent fixtures into emergency lighting fixtures 1300 lumen emergency ballast

Specifications:
  • Steel housing contains, battery, battery charger, transfer circuit and high frequency inverter
  • Optional end caps available
  • Operating temperature 32°F to 122°F (0°C to 50°C)
  • Internal or external mounting to a fluorescent fixture
  • Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts
  • Operates one 8W-54W T5/T5HO, one 17W-40W T8 through T12, one 13W-42W 4-pin compact or one 18W-50W 4-pin long compact fluorescent lamps
  • (1) Lamp 700-1300 Lumens
  • Can be wired to operate switched, un-switched or normally off fixtures without affecting normal operation
  • Will cold start and illuminate lamps
  • Fully Automatic solid state charger
  • High capacity, automatic, dust-tight instantaneous transfer relay
  • Low voltage disconnect prevents over discharge of battery
  • Automatic brownout protection
  • Battery connector prevents battery discharge during installation
  • Red charger monitor LED indicates charging of the battery and AC present
  • Momentary test switch allows for quick operational check of entire system
  • Nickel-Cadmium battery
  • Provides 90 minutes of emergency operation
  • Dual voltage 120/277VAC, 60Hz, 2.7W
  • UL924 Listed
  • Damp location listed
  • 3-year limited warranty
Product Categories:
  • no information to display
T&B AccessQuick ShipThomas & Betts
© Thomas & Betts Corporation 2017. No material from this site may be copied, distributed or used in any way without the express prior permission of Thomas & Betts.