Class I, Division 2 Compliant Exit Sign
The SVX-HZ Series of Exit signs has been
designed specifically for installation in hazardous locations and other high abuse,industrial
environments.Weather resistant, high impacts, vibrations and
variations in temperature. The SVX-HZ Series The SVXH Series is ideally suited for areas where the presence of flammable gases, vapors or liquids can create an explosive gas atmosphere.
- Energy efficient: consumes less than 2.5 watts in any configuration. Exit sign
illuminated by long-life, energy-efficient LEDs.
Single face heavy-duty 1/8” thick aluminum back plate. Polyvinyl chloride
frame, with built-in gasket to prevent water infiltration. Will not dent, peel, rust
or corrode. The sealed, heavy-duty, vandal-resistant polycarbonate faceplate
features an evenly illuminated legend. The fully gasketed faceplate is fastened
with stainless steel tamper-resistant screws. Self contained; batteries and
circuitry are located inside the exit housing.
Available with sealed, maintenance-free Nickel-Cadmium batteries that
provide 90 minutes of emergency operation. Batteries recharge per UL924
AC and Self-Powered models have universal, 2-wire input 120V to 277VAC
Tamper-resistant, hermetically sealed magnetic test switch for
Diagnostic / Self Test circuitry is standard on all Self-Powered models. This
circuitry is programmed to ensure the exit sign’s readiness and reliability
by continuously monitoring every critical function of the unit. If a problem
occurs, a single “service required” indicator illuminates immediately. A detailed
diagnostic display that will further indicate the nature of the fault is located
on the inside of the exit sign, out of sight from the general public. The self
test will test the unit for a minimum of 30 seconds every 30 days, 30 minutes
every 60 days and 90 minutes annually.
NEXUS® System wired or wireless compatible
Can be wall, end or ceiling mounted. Comes standard with an industrial-grade,
Die-Cast aluminum electrical box. 1/2” electrical conduit entry on both sides
and at the top. Each unit comes standard with one tamper-proof driver bit
Legend and chevron comply with UL requirements. Evaluated to the UL 844
standard for Class I Division 2, Groups A, B, C and D, Temperature Code:
T6 (maximum 185°F/85°C). Evaluated to UL 924 and UL1598 standards.
Suitable for cold-weather: -4°F/-20°C (Self-Powered model, “CW” option) and
-40°F/-40°C (AC only)
CSA US Listed
5-year limited warranty
View list of Nexus compatible units