Home  |  Site Map Print this page       USA  |  Canada(EN)  |  Canada(FR)  |  UK   
   Full Line Catalog
Company | Literature | Tech Info | What's New | Nexus | FAQs | Warehouses | Contact Us | Links
   Product Categories
Product Search: (Not for part number lookup.)

Acrobat© Reader© is required to view all PDF downloads.

Full Line Catalog  /  Spec Grade Industrial  /  Survive-All™ SVXH Series
Catalog Sheet
Specification Sheet
Instruction Sheet
Photometric Data
Product Flyer
Survive-All™ SVXH Series

Class I Division 2 Compliant Exit Sign

The SVXH Series of Combination Exit Emergency Battery Unit has been designed specifically for installation in hazardous locations and other high abuse, industrial environments.Weather resistant, high impacts, vibrations and variations in temperature.

The SVXH Series is ideally suited for areas where the presence of flammable gases, vapors or liquids can create an explosive gas atmosphere.

  • Exit sign module is illuminated by long-life, energy-efficient LEDs. Fully field adjustable lamp head assembly comes standard with a selection of two (2) MR16 halogen lamps for optimum illumination over the path of egress. Lamps are shielded by a cast aluminum housing and a polycarbonate cover
  • Rugged PVC body will not dent, peel or corrode. The sealed faceplate has a heavy-duty, vandal-resistant polycarbonate cover and is fastened with stainless steel tamper-resistant screws. The polyvinyl chloride frame has a built-in gasket to prevent water infiltration. The heavy-duty 1/8” thick aluminum back plate has keyholes for secure wall mount installation
  • Available with sealed, maintenance-free Nickel-Cadmium, or Nickel-Metal Hydride batteries
  • Fully automatic pulse charger offers 120/277VAC, 60Hz, current limiting temperature compensation, short circuit proof, low voltage battery disconnect, brownout protection and standard solid state transfer feature. The test switch is magnetically operated
  • Advanced Diagnostic circuitry is standard on all Self-Powered models. This circuitry is programmed to ensure the combination unit’s readiness and reliability by continuously monitoring every critical function of the unit. If a problem occurs, a single “Service Required” indicator illuminates immediately. A detailed diagnostic display that will further indicate the nature of the fault is located on the inside of the exit sign, out of sight from the general public. The self test will test the unit for a minimum of 30 seconds every 30 days, 30 minutes every 60 days and 90 minutes annually
  • Designed for wall-mount installation only with a 1/2” electrical conduit entry on both sides and at the top
  • CSA US Listed
  • Evaluated to UL924 standard and to UL844 standard for hazardous locations: Class I Division 2, Groups A, B, C and D. A range of lamp ratings are available for different temperature codes
  • 5-year limited warranty
Product Categories:

View list of Nexus compatible units

T&B AccessQuick ShipThomas & Betts
© Thomas & Betts Corporation 2018. No material from this site may be copied, distributed or used in any way without the express prior permission of Thomas & Betts.